Friday, 15 December 2017

Final Animation

Here is the final animation of my grandfather clock that I have been modelling over this semester. When I done the final render I created an ambient layer and rendered that in Arnold so the clock looked more realistic. I then put this into after effects and turned it into a multiply layer.

Overall I am very pleased with my final animation as I had no prior experience with Maya or any other modelling and animation software. The model turned out to look very similar, but not exact, to the reference picture I was using. Because of this I feel that my animation and model were very successful.

Final Animation Link

Thursday, 14 December 2017

Test Animation

I animated the first half of my animation and rendered it so I could see what it looks like when completed. I however did not animate it with the textures and lights. Overall I am pleased with the animation so far as it is well paced and runs smoothly.

Clock Animation

Animation Plan

For my animation I have chosen to make my clock move in a organic way. To do this I am going to make it look around and do a short walk. I want to create the idea that the clock is confused and unsure how to walk. I'm going to do this by making it walk slowly at first and then speed up.

1. Clock looks around - side to side and then up and down
2. Looks back down towards one foot and then lifts it
3. Head snaps back into original position out of shock
4. Looks back down and lifts opposite back foot
5. Slowly starts to walk forward
6. Stops walking
7. Looks back up and starts to shake head
8. Does a small nod and starts to walk again
9. Speeds up walking
10. Stops walking
11. End of animation

Wednesday, 13 December 2017

Lighting Edit

I edited the lighting so more of the detail in the clock can be seen, This change makes the clock look more professional and realistic. I'm very happy with how the clock has turned out as it looks similar to the reference picture.

Lighting

I added three spot lights around the clock to make it much easier to see. The texturing and detail is much more visible now but I might edit the brightness of the lights to make it even lighter and clearer.

Texturing


I added a wooden texture to the main body of the clock. Along with this I added a glass texture to the bottom door and a clock face to the top. Overall I am very happy with the texturing as the clock looks very realistic and quite similar to my original picture I was using as a reference. However the texturing is very hard to see as I need to add lighting. 



Thursday, 7 December 2017

Completion of Rig


I completed my rig by adding in control curves at all the joints so I can now animate the clock. I also added in IK handles on the feet so it will be able to walk and move.

Sunday, 3 December 2017

Compression Infographic

I created this infographic using Piktochart and all of the images used are from there too.
https://piktochart.com/

Wednesday, 29 November 2017

Clock Rig


I successfully managed to rig my clock so it can now move in a organic way similar to a human. I feel that this will create an effective animation as it will look very interesting as it is a realistic object moving in an unrealistic way.

Clock Model



I finished modelling the top platform of the grandfather clock and extruded in the space where the clock face sits. I feel that the model over all looks accurate to the original image as there are only small details that I left out.

Tuesday, 14 November 2017

Evaluation of Animation Investigation

When searching on how to set a key frame and edit a curve in the graph editor I explored various tutorials and forms. I found it quite difficult to find points on very specific parts of animation as most of it was included in larger tutorials that were hard to understand unless you followed most of the tutorial. As this was the most common way I was finding information I decided to follow some basic bouncing ball and other various tutorials. I feel that doing this was very successful in my learning as I found out how to set key frames and edit curves in the graph editor which is what I wanted to be able to do after I finished my investigations.

Animating A Basic Bouncing Ball

The first step in animating a simple bouncing ball is to create a sphere and move it the desired height above the plane.
Next on the animation bar at the bottom you need to select the 1st frame and in the Channel Box/Layout Editor select both the Translator Y and Scale Y. Right click on the selected boxes and select Key Selected. This creates a small red box next to the name.
Next select the 15th frame and move the ball down to the bottom of the plane. Also scale down the Y axis to make it seem like it is being deformed when it is hitting the ground. Once again go into the Channel Box/Layout Editor and repeat the process with the Key Selected.
Select the 30th frame and rescale and move the ball back up the Y axis. Also once again repeat the Key Selected process.
However when you now play your animation it might seem very artificial and too soft for a falling bouncing ball. This can be changed in the Graph Editor found in Windows - Animation Editors.
Once you have this box open there will be a simple graph. To be able to edit this graph correctly you need to select the orange points at the curves and select the Break Tangent button found at the top of the editor.
Once you have broken the tangents you can now edit the curve. When you select the orange points a grey point will appear at either side. Move these points  so the graph no longer has curves but straight lines.
The bouncing ball should now be animated in a more realistic way.

Thursday, 9 November 2017

Clock Progress


 This is the progress I have made on my Grandfather Clock model. I have made the base and the first set of pillars that sit in front of the main body. It was a challenge getting the base to look like the reference pictures but I successfully managed to make it look similar. Next I will go onto making the top half of the clock where the clock face sits.

Main Model Change

I have decided to change my main model to a Grandfather Clock as I feel that there would be more opportunity to animate and rig. When animating this I could make the doors and clock hands move but also make it body move like an organic form and not an inanimate object. I feel that this model is a good challenge as I would like to put as much detail in as possible.


Wednesday, 1 November 2017

Camera Texture

I managed to add simple textures to my camera model I made. I used a black leather texture for the main body, a reflective grey for the buttons and top half of the object and a reflective dark grey for the lenses.


Wednesday, 25 October 2017

Wednesday, 18 October 2017

Sword Update


When I started to model the handle part of the sword I realised that I had made a few mistakes with the blade so I could not make the handle connect to it well. This meant that I had to go in and correct these mistakes before I could proceed hence why there is not that much progress from last week. I did however manage to start modelling part of handle and this has gave me a good start for making the rest of the pieces that connect on to it. 


Modelling Toolkit


The modelling toolkit is a very useful way of accessing all the basic tools for poly modelling. This will be useful throughout the modelling process as it is one area where the common tools are. Some of the most important parts about the modelling toolkit it that it has the selection tools as well as the ability to edit symmetry and soft selection.
I had some challenges trying to figure out how soft selection worked and the benefit of it but after finding out how to use it I can see why it will be beneficial to modelling. I also did not realize that you could edit symmetry in the toolkit or choose which selection tool you were on; face selection, object selection etc. and I feel that this will now make modelling easier and quicker for me.
Concerning how well I learned when doing this project I would say around 70% as I feel that I learned a lot but most of it I already knew, I just didn't realize it was in the modelling tool kit.

Thursday, 12 October 2017

3 Rules to Spark Learning

Rule #1 - Curiosity comes first
      "Questions can be windows to great instruction, but not the other way around."
Rule #2 - Embrace the mess
      "Trial and error can still be an informal part of what we do every single day"
Rule #3 - Practise reflection
      "What we do is important. It deserves our care, but it also deserves our revision."

Content that cultivates curiosity and inquiry can result in more meaning to students lives and can spark their imagination.

Final Animation

Here is the final animation of my grandfather clock that I have been modelling over this semester. When I done the final render I created an...